How do I apply the GLASSGUARD® Miracle Mould Removal Gel?

Before You Begin:
- Ensure the area is well-ventilated.
- Make sure the surface is dry and clean.
Preparation:
- Remove the foil covering the cap before attaching the nozzle.
- Twist off the nozzle cap before use.
Application:
- Squeeze the gel and spread it evenly across the affected area.
- Allow the gel to sit for 3-5 hours.
Cleaning:
- Wipe away the gel and mould with a damp cloth or rinse with water.
- For stubborn mold, a second treatment and the use of an abrasive pad may be necessary.
Note:
- Do not touch the gel directly with your hands.

General Safety:
- If medical advice is needed, keep the product container or label on hand.
- Do not ingest.
- Keep out of reach of children and pets.
- Avoid direct contact with skin and eyes.
- Avoid inhaling vapors for prolonged periods or repeatedly.
- Keep away from heat, sparks, flames, and other ignition sources.
In Case of Contact:
- Eyes: If contact occurs, rinse thoroughly with water. Seek medical attention if irritation persists.
- Emergency Contacts:
  - Australia: Call 000 or the Poisons Helpline at 13 11 26.
  - USA: Call 1-800-222-1222.
  - Canada: Call 1-844-764-7669.
  - UK: Contact NHS24 on 111.
Additional Information:
- For more detailed safety information, refer to the Material Safety Data Sheet (MSDS) available at glassguard.com/msds.

How do I apply the GLASSGUARD® Miracle Mould Removal Gel?Updated 3 months ago